Rublev Colours Stack Flake White (50ml)
Stack Process Flake White (also known as lead white) is lead white made according to the traditional method using the 'stack process' or 'old Dutch method' to make the lead white pigment that is then ground in linseed oil.Composition and Permanence
|Stack Process Flake White|
|Pigment Classification:||Synthetic inorganic|
|Colour Index:||Pigment White 1 (77597)|
|Chemical Name:||Basic lead carbonate or Lead(II) carbonate basic|
|Permanence:||A - Permanent|
|Safety Information:||DANGER! CONTAINS LEAD. HARMFUL IF SWALLOWED. Avoid ingestion and skin contact. Avoid inhaling dusts. Wear protective clothing and gloves to prevent contact with skin. Never use near children or pets. Conforms to ASTM D 4236. |
For a detailed explanation of the terms in the table above, please visit Composition and Permanence.Notes
All images of color swatches in this web site are only approximations of the actual color of the oil paint. We have taken every care to match the color in these pictures on calibrated color monitors to the actual color. However, because of the wide variance in color monitors the results you get may vary.
Color Swatch Note: The color swatch was created with a thick application (left side) of color and a tint (right side) made with equal parts of color and titanium white and applied on acrylic primed cotton canvas.
Drawdown Note: The image of the "drawdown" contains a pre-mixed paint film of 6 mil (0.006 inch) thickness applied to a standard test card for the purposes of examining color consistency, opacity and other qualities. The drawdowns show the color full strength (mass tone), on the left, and mixed in a 1:2 ratio with bone black on the right. The bottom area of the drawdowns are scraped to show undertones.
Click here for the Safety Data SheetCalifornia Proposition 65: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.