Natural Pigments Lemon Ocher 5kg
Lemon Ocher is a natural yellow iron oxide hydroxide mineral (goethite) from quarries in northern Italy. It is a bright yellow in tints and washes that is transparent. It has two major characteristics: it never fades in daylight and the color is highly concentrated.
|Common Names:||English: lemon ocher |
French: ocre citron
German: Ocker Zitrone
Italian: ocra citron
Spanish: ocre limon
|Synonyms:||Goethite, limonite, raw sienna, yellow earth, yellow ocher, yellow iron oxide, yellow hydrated oxide and iron hydroxide pigment|
|Alternate Name:||Mars yellow is the name given to the synthetic form of yellow iron oxide hydroxide.|
Origin and History
Known since the antiquity, ocher (okhra in Greek) occurs naturally as yellow ocher (goethite) or as red ocher (hematite). Ocher has been used as a pigment since prehistoric times and is perhaps the most widely used pigment for artists paints.
Ocher is a natural earth containing clay tinted by hydrated iron oxide and is principally composed of the mineral goethite, clay, quartz and gypsum or manganese carbonate. Historically, yellow ocher was designated by the mineral name limonite. Limonite is a general term used to describe all forms of hydrated iron oxide minerals (á-FeOOH) that occur as natural earth. Limonite includes the minerals goethite, akaganeite and lepidocrocite. The names for yellow iron oxide pigments are confusing. The names earth and ocher are suitable when it is clear that the pigment comes from a natural source. Earth is a more general term, since ocher refers to a specific type of iron oxide deposit containing kaolin (clay) and quartz. To be considered an ocher, for example, the content of iron oxide must not be less than 12%. Depending upon the content of hydrated iron oxide, the color of ocher varies from light yellow to orange-red. Like red iron oxides (hematite), they are found around the world and have been used as pigments since prehistory. French ocher, historically one of the best grades of limonite, contains about 20% iron oxide and is high in silica.
Ocher grades into sienna, a yellow-brown pigment containing a higher percentage of iron ore than ocher as well as some manganese dioxide. Sienna grades into umber, which is darker brown and contains a higher percentage of manganese dioxide. Burnt sienna is brown or bright red, burnt umber is a darker brown than umber.
Ocher is not naturally usable as a pigment and therefore needs to undergo several important processes, such as:
- Extract ore from the quarries.
- Separate ocher from sand using water and centripetal force.
- Blend different ocher extracted from diverse veins to obtain the selected colors.
- Grind to 50 microns and pack.
Permanence and Compatibility
Ocher is among the most permanent colors among the artist's palette. It is compatible with all other pigments, and can be used with good results in all mediums.
Oil Absorption and Grinding
Ocher absorbs a moderately high amount of oil. The oil absorption ratio is 30–35 parts by weight of linseed oil to 100 parts by weight of pigment. If the measurement were grams, lemon ocher would require 30–35 grams of linseed oil to grind 100 grams of pigment to form a stiff paste. It slows the drying of oil paint, but forms an excellent film.
Ocher is not considered toxic, but care should be used in handling the dry powder pigment to avoid inhaling the dust.
Pigment: Lemon Ocher
|Colour Index:||Pigment Yellow 43 (77492)|
|Chemical Name:||Iron Oxide Hydroxide|
|ASTM Lightfastness Rating|