The Fine set of Perma-Grit's abrasive tools cut, sand and shape in any direction. They outlast sandpaper thousands of times and can be used to finish all the materials, listed below and more. If you are unable to cut or shape something, try Perma-Grit's range of abrasives, you will be amazed. Simple tools to use, tough and will give far better results.
FINE grit is approx. equivalent to UK 320 / US 120 sandpaper.
Angle File
Angle or Tangent hand file FINE. Excellent anywhere there is a 90° angle needed. The R-201 is approximately 75°, which gives the builder the accuracy needed to shape a 90° angle. Either an 1/8th radius or a sharp corner can be produced simply by rotating the tool. Model builders find this particularly useful for fabricating servo trays, it is also good for cleaning corners and edges on laser cut wood.
Hand File Flat
Flat hand file. Dims. 230 x 38mm thick 1.55mm. Useful to get into narrow places where the sanding block is unable to fit. Use to clean up slots, cut outs in former's and general sanding. They may not be perfectly flat, they don’t need to be, use the Perma-Grit sanding blocks which are.
Round Tube File 13mm - 19.5mm
Round steel Tube file 13.5mm (+/-0.5mm), FINE. Dims approx. 215 x 13 x 13.5mm approx. Tungsten carbide abrasive grit, use to shape arches and curves with precision. No need to glue sandpaper to dowels anymore! These tools are perfect for fillets, and all concave curves. Use to shape or enlarge holes or arches etc.
Round Steel Tube File FINE 19.5mm diameter (+/-0.5mm) . Dims. approx 215 x 19.5 x 19.5mm. Tungsten carbide abrasive grit shape arches and curves with precision. No need to glue sandpaper to dowels anymore! These tools are perfect for fillets, grooves and all concave curves. Use to shape or enlarge holes or arches etc. Shape cowlings, nose cones, wheel spats etc.
Radius External/Internal Curve
Half Round 13 mm Radius File FINE. Gritted on the external curve. Dims. 231 x 22 x 7mm approx. Shape arches and curves with precision. No need to glue sandpaper to dowels anymore! These tools are perfect for fillets, and all concave curves. Use to shape or enlarge holes or arches etc.
13 mm (+/-0.5mm) Radius Internal Curved hand file, FINE. Gritted on the internal surface. Dims 231 x 30 x 11 mm approx . Concave hand tool fine grit on the internal curve. Use to finish leading and trailing edges, or radius any sharp corners etc.
Round File 6.5mm
Round File 6.5 mm (+/-0.5mm), FINE. Dims approx. 235 x 6.5 x 6.5 mm. Tungsten carbide abrasive gritted length approx. 110 mm. Red plastic Comfy grip handle. Use to shape arches and curves with precision. No need to glue sandpaper to dowels anymore! These tools are perfect for fillets, and all concave curves. Use to shape or enlarge holes or arches etc.
Square File 6.5mm
Square tungsten carbide grit File 6.5mm Fine (+/-0.5mm). Red plastic Comfy grip handle. Dims. approx. 230 x 6.5 x 6.5mm. Gritted length 110mm. Enlarge or shape holes fabricate Mini Servo trays. Cut in any direction and virtually any material, the same as all of our tools!
Set of 8
Set of 8 Hand Tools FINE, in a Perma-Grit branded Red Canvas Tool Roll, velcro fastening. Contains:- F101 Flat File, R101 internal grit 13mm Radius File, R200F external grit 13mm Radius File, R201F Angle 75 degree File, R202F 19.5mm Round tube File, R203F 13mm Round tube File, R204F Round 6.5mm File, S204F Square 6.5mm File