Are you tired of waiting for hours or even days for your urethane rubber products to cure? Do you need to accelerate the demold time of your rubber molds and parts without compromising their quality? Look no further than Smooth-On Kick-It!™ Accelerator, designed to speed up the cure time of VytaFlex™, ReoFlex™, and PMC™ rubber products from Smooth-On, a trusted brand in the industry. This innovative additive enables you to remove your parts or rubber molds from the original model much faster, streamlining your production process and increasing your productivity.

The Kick-It!™ Accelerator is carefully formulated to reduce the demold time of your rubber products without significantly affecting their ultimate physical properties. This means you can achieve faster production cycles while maintaining the same level of quality and performance from your rubber products. The accelerator can be used with a wide range of Smooth-On products, including VytaFlex™, ReoFlex™, and PMC™, making it an excellent addition to your toolkit.

To ensure safe and effective use, it's essential to follow the recommended instructions and safety precautions. Always use the Kick-It!™ Accelerator in a properly ventilated area, wearing safety glasses, long sleeves, and rubber gloves to minimize the risk of contamination. Store and use all products at room temperature, and make sure to follow the specified mixing and measuring guidelines to achieve optimal results.

The Kick-It!™ Accelerator has a limited shelf life, so it's crucial to use it as soon as possible. When using the accelerator, you'll need to adjust your mixing and pouring process to accommodate the reduced pot life. This may require some adjustments to your workflow, but the benefits of faster demold times and increased productivity make it well worth the effort.

One of the most significant advantages of the Kick-It!™ Accelerator is its versatility. You can customize the acceleration process to suit your specific needs, whether you're working with VytaFlex™, ReoFlex™, or PMC™ rubber products. By adjusting the percentage of accelerator added to your mixture, you can optimize the demold time to fit your production schedule. For example, adding 3% accelerator to VytaFlex™ 10 can reduce the demold time from 24 hours to just 7 hours, while exposing the material to 150°F can further reduce the demold time by half.

Whether you're a seasoned professional or just starting out, the Smooth-On Kick-It!™ Accelerator is an invaluable tool for anyone working with urethane rubber products. By accelerating the demold time of your rubber molds and parts, you can increase your productivity, reduce waiting times, and focus on producing high-quality products. With its ease of use, versatility, and proven effectiveness, the Kick-It!™ Accelerator is an essential addition to your toolkit.