Permalac Original

SKU: SLP-420698750
Out of stock
Out of stock
Unit Price
US$ 61.50
Out of stock

Permalac is a fast-drying, easy-to-apply, acrylic lacquer coating. Permalac is highly resistant to
environmental breakdown caused by UV, acid rain, and salt. It has outstanding adhesion to a
variety of substrates, including patinated and polished metals, hard woods, and masonry or stone
products. Users report excellent results on copper, brass, bronze, steel, aluminum, zinc, and painted
wood substrates in both land and marine applications.
The following instructions can be applied to all sheens of the Permalac Original, Permalac EF,
Permalac NT, and Permalac Blackener.
Determine your method of application: This decision should be made based on your own
experience and skill level, as well as the size and nature of the job. If the Permalac must be applied
on location, it might be best to apply with a brush to avoid overspray. Small parts and jewelry
might be best dipped. You might wish to spray a large project for speed and ease of application.
Regardless of your application method, it is important that your substrate is clean and free of
moisture. We recommend that you wipe non-porous substrates with acetone or lacquer thinner to
degrease and assist in wetting.
Spraying Permalac: When spraying Permalac, you may need to thin it first. This can be done with
most commercially available lacquer thinners. Peacock Laboratories also manufactures a complete
array of thinners to suit varying weather conditions and customer preferences. The mix ratio is
four parts Permalac to one part thinner. You may wish to increase this ratio to three parts Permalac
to one part thinner if conditions are particularly hot and dry or if the substrate is particularly porous.
For spraying steel, the mix ratio is one-part Permalac to one part thinner for the first coat, then four
parts Permalac to one part thinner for the remaining coats. Once the Permalac has been reduced, it
can be sprayed. Be sure to follow all the safety guidelines outlined in the SDS sheet(s). This
includes using an NAIC-approved organic solvent respirator, goggles, and using Permalac in a
ventilated area. The recommended spray gun is an HVLP sprayer with a 1.0-1.3 mm tip. Use 25-
30 psi and adjust the gun so the material is fully atomized. You also want to avoid large droplets
in your spray. When spraying, you want to be laying enough coating that the surface appears wet,
and the droplets flow together. Apply 3 coats for interior applications OR 4-6 coats for exterior
applications in this manner (wood may require 4-8 coats), allowing 30-60 minutes between coats.

Shipping from
This product is shipped from our supplier's warehouse in New York, NY, United States
Our guarantee
This product is brand new and includes the manufacturer's warranty, so you can buy with confidence.
A 25% handling charge is levied against all authorized returns except those due to our error. Unauthorized returns are subject to a 40% handling charge. Damages & defects must be reported to us within 14 days.
Customers Who Bought This Item Also Bought
You recently viewed items